|
Blaze 3.9
|
| #define BLAZE_CONSTRAINT_MATRICES_MUST_HAVE_DIFFERENT_STORAGE_ORDER | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case either of the two given data types T1 or T2 is not a matrix type and in case the storage order of both matrix types does match, a compilation error is created.
| #define BLAZE_CONSTRAINT_MATRICES_MUST_HAVE_SAME_STORAGE_ORDER | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case either of the two given data types T1 or T2 is not a matrix type and in case the storage order of both matrix types doesn't match, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ADAPTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an adaptor type (as for instance a LowerMatrix, UpperMatrix, or SymmetricMatrix) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an addition expression (i.e. a type derived from the AddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ALIGNED_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide aligned data values with respect to the requirements of the available instruction set a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_BAND_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a band type (i.e. a dense or sparse band), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_BINARYMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a binary map expression (i.e. a type derived from the BinaryMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_BLAS_COMPATIBLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a BLAS compatible data type (i.e. float, double, complex<float>, or complex<double>), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_CLEARABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not clearable, i.e. does not have a clear() member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COLUMN_MAJOR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a column-major dense or sparse matrix type (i.e. a matrix type whose storage order is set to true) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COLUMN_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a column type (i.e. a dense or sparse column), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COLUMN_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a column dense or sparse vector type (i.e. a vector type whose transposition flag is set to blaze::columnVector) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COLUMNS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a column selection (i.e. a view on selected columns of a dense or sparse matrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COMMUTATIVE_TYPES | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 are not commutative (i.e. cannot be swapped in mathematical operations), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_COMPUTATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a computational expression (i.e. a type derived from the Computation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_CONTIGUOUS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an array-like data type with contiguous elements a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_CROSSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a cross product expression (i.e. a type derived from the CrossExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_CUDA_ASSIGNABLE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not CUDA-assignable (i.e. does not provide the according CUDA member constants or returns false), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_CUSTOM_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a custom data type, i.e. a custom vector or matrix, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLARATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declaration expression (i.e. a type derived from the Declaration base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLDIAGEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a decldiag expression (i.e. a type derived from the DeclDiagExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declaration expression (i.e. a type derived from the DeclExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLHERMEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declherm expression (i.e. a type derived from the DeclHermExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLLOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a decllow expression (i.e. a type derived from the DeclLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLSTRLOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declstrlow expression (i.e. a type derived from the DeclStrLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLSTRUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declstrupp expression (i.e. a type derived from the DeclStrUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLSYMEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declsym expression (i.e. a type derived from the DeclSymExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLUNILOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declunilow expression (i.e. a type derived from the DeclUniLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLUNIUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a decluniupp expression (i.e. a type derived from the DeclUniUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DECLUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a declupp expression (i.e. a type derived from the DeclUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DENSE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a dense matrix type (i.e. a type that is derived from the DenseMatrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DENSE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a dense vector type (i.e. a type that is derived from the DenseVector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DIAGONAL_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a diagonal matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_DIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a division expression (i.e. a type derived from the DivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_EIGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an eigenvalue expression (i.e. a type derived from the EigenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ELEMENTS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an element selection (i.e. a view on selected elements of a dense or sparse vector), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_EVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an evaluation expression (i.e. a type derived from the EvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_EXPANDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an expansion expression (i.e. a type derived from the ExpandExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_EXPRESSION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an expression (i.e. a type derived from the Expression base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_GENERAL_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a general matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_GENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a generator expression (i.e. a type derived from the GenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_HERMITIAN_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an Hermitian matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_IDENTITY_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an identity matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_INITIALIZER_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an initializer data type, i.e. an initializer vector or matrix, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_INVERTIBLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an invertible data type (i.e. a BLAS compatible type, long double, or any matrix with BLAS compatible element type), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_KRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a Kronecker product expression (i.e. a type derived from the KronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_LOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a lower triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATEVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix evaluation expression (i.e. a type derived from the MatEvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATEXPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix exponential expression (i.e. a type derived from the MatExpExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix generator expression (i.e. a type derived from the MatGenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATINVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix inversion expression (i.e. a type derived from the MatInvExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a unary matrix map expression (i.e. a type derived from the MatMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/matrix addition expression (i.e. a type derived from the MatMatAddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATKRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/matrix Kronecker product expression (i.e. a type derived from the MatMatKronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a binary matrix map expression (i.e. a type derived from the MatMatMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/matrix multiplication expression (i.e. a type derived from the MatMatMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATSOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a single LSE solver expression (i.e. a type derived from the MatMatSolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATMATSUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/matrix subtraction expression (i.e. a type derived from the MatMatSubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATNOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix no-alias expression (i.e. a type derived from the MatNoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATNOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix no-SIMD expression (i.e. a type derived from the MatNoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATREDUCEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix reduction expression (i.e. a type derived from the MatReduceExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATREPEATEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix repeater expression (i.e. a type derived from the MatRepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix type (i.e. a type that is derived from the Matrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATRIX_WITH_STORAGE_ORDER | ( | T, | |
| SO ) |
Constraint on the data type.
In case the given data type T is not a dense or sparse matrix type and in case the storage order of the given dense or sparse vector type T is not set to SO, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATSCALARDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/scalar division expression (i.e. a type derived from the MatScalarDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATSCALARMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/scalar multiplication expression (i.e. a type derived from the MatScalarMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATSERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix serial evaluation expression (i.e. a type derived from the MatSerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATTRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix transposition expression (i.e. a type derived from the MatTransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a matrix/vector multiplication expression (i.e. a type derived from the MatVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MATVECSOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a single LSE solver expression (i.e. a type derived from the MatVecSolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MODIFICATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a modification expression (i.e. a type derived from the Modification base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_MULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a multiplication expression (i.e. a type derived from the MultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_NOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a no-alias expression (i.e. a type derived from the NoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_NOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a no-SIMD expression (i.e. a type derived from the NoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_OPERATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an operational expression (i.e. a type derived from the Operation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_OPPOSED_VIEW | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an opposed view, i.e. is not a view that is opposed to the natural storage order of its underlying type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_PADDED_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does not employ or simulate padding (i.e. a special treatment of remainder elements is necessary) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_PADDING_ENABLED | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide support for padding (i.e. does not properly treat padding elements), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_PROXY_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a proxy type (i.e. a type derived from the Proxy class template), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_REDUCEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a reduce expression (i.e. a type derived from the ReduceExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_REPEATEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a repeater expression (i.e. a type derived from the RepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_RESIZABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not resizable, i.e. does not have a 'resize' member function that could be used to change the size, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_RESTRICTED | ( | T | ) |
Constraint on the data type.
In case the given data type T does not have a restricted data access, i.e. does not restrict specific operations on its data, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ROW_MAJOR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a row-major dense or sparse matrix type (i.e. a matrix type whose storage order is set to false) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ROW_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a row type (i.e. a dense or sparse row), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ROW_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a row dense or sparse vector type (i.e. a vector type whose transposition flag is set to blaze::rowVector) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ROWS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a row selection (i.e. a view on selected rows of a dense or sparse matrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SCALAR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a scalar type (i.e. a vector, matrix, reference or pointer type), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SCHUREXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a Schur product expression (i.e. a type derived from the SchurExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a serial evaluation expression (i.e. a type derived from the SerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SHRINKABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not shrinkable, i.e. does not have a 'shrinkToFit' member function that could be used to reduce the capacity, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SIMD_COMBINABLE_TYPES | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 are not SIMD combinable (i.e. do not have a common SIMD interface), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SIMD_ENABLED | ( | T | ) |
Constraint on the data type.
In case the given data type T is not SIMD-enabled (i.e. does not provide the according SIMD member functions), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SIMD_PACK | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a SIMD pack, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SMP_ASSIGNABLE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not SMP-assignable (i.e. cannot be assigned by multiple threads), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a solver expression (i.e. a type derived from the SolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SPARSE_ELEMENT_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a sparse element type (i.e. a type derived from the SparseElement base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SPARSE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a sparse matrix type (i.e. whether T is derived from the SparseMatrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SPARSE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a sparse vector type (i.e. a type that is derived from the SparseVector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SQUARE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a square matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_STATIC_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a static data type, i.e. a vector or matrix with dimensions fixed at compile time, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_STRICTLY_LOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a strictly lower triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_STRICTLY_TRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a strictly lower or upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_STRICTLY_UPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a strictly upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a subtraction expression (i.e. a type derived from the SubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SUBMATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a submatrix type (i.e. a dense or sparse submatrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SUBVECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a subvector type (i.e. a dense or sparse subvector), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SVDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a singular value expression (i.e. a type derived from the SVDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_SYMMETRIC_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a symmetric matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_TRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a transposition expression (i.e. a type derived from the TransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_TRANSFORMATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a transformation expression (i.e. a type derived from the Transformation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_TRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a lower or upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_TVECMATMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/matrix multiplication expression (i.e. a type derived from the TVecMatMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UNARYMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a unary map expression (i.e. a type derived from the UnaryMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UNIFORM_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a uniform vector or matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UNILOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a lower unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UNITRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a lower or upper unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UNIUPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a upper unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_UPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECEVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector evaluation expression (i.e. a type derived from the VecEvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECEXPANDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector expansion expression (i.e. a type derived from the VecExpandExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector generator expression (i.e. a type derived from the VecGenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a unary vector map expression (i.e. a type derived from the VecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECNOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector no-alias expression (i.e. a type derived from the VecNoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECNOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector no-SIMD expression (i.e. a type derived from the VecNoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECREPEATTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector repeater expression (i.e. a type derived from the VecRepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECSCALARDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/scalar division expression (i.e. a type derived from the VecScalarDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECSCALARMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/scalar multiplication expression (i.e. a type derived from the VecScalarMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECSERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector serial evaluation expression (i.e. a type derived from the VecSerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector type (i.e. a type that is derived from the Vector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECTOR_WITH_TRANSPOSE_FLAG | ( | T, | |
| TF ) |
Constraint on the data type.
In case the given data type T is not a dense or sparse vector type and in case the transpose flag of the given dense or sparse vector type T is not set to TF, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECTRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector transposition expression (i.e. a type derived from the VecTransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECTVECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an outer map expression (i.e. a type derived from the VecTVecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECTVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not an outer product expression (i.e. a type derived from the VecTVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/vector addition expression (i.e. a type derived from the VecVecAddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/vector division expression (i.e. a type derived from the VecVecDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECKRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/vector Kronecker product expression (i.e. a type derived from the VecVecKronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a binary vector map expression (i.e. a type derived from the VecVecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/vector multiplication expression (i.e. a type derived from the VecVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VECVECSUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a vector/vector subtraction expression (i.e. a type derived from the VecVecSubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_VIEW_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a view type (i.e. a subvector, submatrix, row, column, ...), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_BE_ZERO_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is not a zero vector or matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATMATADDEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid matrix/matrix addition, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATMATKRONEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid matrix/matrix Kronecker product, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATMATMULTEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid matrix/matrix multiplication, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATMATSOLVEEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid single LSE solver, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATMATSUBEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid matrix/matrix subtraction, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATVECMULTEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid matrix/vector multiplication, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_MATVECSOLVEEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid single LSE solver, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_SCHUREXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid Schur product, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_TVECMATMULTEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/matrix multiplication, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECTVECMULTEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector multiplication, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECVECADDEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector addition, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECVECDIVEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector division, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECVECKRONEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector Kronecker product, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECVECMULTEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector multiplication, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_FORM_VALID_VECVECSUBEXPR | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 do not form a valid vector/vector subtraction, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_HAVE_COMPOSITE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide a public nested type alias named CompositeType a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_HAVE_CONST_DATA_ACCESS | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide low-level data access to constant data, i.e. does not have a const 'data' member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_HAVE_MUTABLE_DATA_ACCESS | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide low-level data access to mutable data, i.e. does not have a non-const 'data' member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_HAVE_RESULT_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does not provide a public nested type alias named ResultType a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ADAPTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an adaptor type (as for instance LowerMatrix, UpperMatrix, or SymmetricMatrix) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an addition expression (i.e. a type derived from the AddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ALIGNED_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide aligned data values with respect to the requirements of the available instruction set a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_BAND_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a band type (i.e. a dense or sparse band), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_BINARYMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a binary map expression (i.e. a type derived from the BinaryMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_BLAS_COMPATIBLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a BLAS compatible type (i.e. float, double, complex<float>, or complex<double>), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_CLEARABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is clearable, i.e. has a clear() member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COLUMN_MAJOR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a column-major dense or sparse matrix type (i.e. a matrix type whose storage order is set to true) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COLUMN_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a column type (i.e. a dense or sparse column), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COLUMN_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a column dense or sparse vector type (i.e. a vector type whose transposition flag is set to blaze::columnVector) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COLUMNS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a column selection type (i.e. a view on selected columns of a dense or sparse matrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COMMUTATIVE_TYPES | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 are commutative (i.e. can be swapped in mathematical operations), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_COMPUTATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a computational expression (i.e. a type derived from the Computation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_CONTIGUOUS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an array-like data type with contiguous elements a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_CROSSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a cross product expression (i.e. a type derived from the CrossExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_CUDA_ASSIGNABLE | ( | T | ) |
Constraint on the data type.
In case the given data type T is CUDA-assignable (i.e. does provide the according CUDA member constants and returns true), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_CUSTOM_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a custom data type, i.e. a custom vector or matrix, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLARATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declaration expression (i.e. a type derived from the Declaration base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLDIAGEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a decldiag expression (i.e. a type derived from the DeclDiagExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declaration expression (i.e. a type derived from the DeclExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLHERMEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declherm expression (i.e. a type derived from the DeclHermExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLLOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a decllow expression (i.e. a type derived from the DeclLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLSTRLOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declstrlow expression (i.e. a type derived from the DeclStrLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLSTRUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declstrupp expression (i.e. a type derived from the DeclStrUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLSYMEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declsym expression (i.e. a type derived from the DeclSymExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLUNILOWEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declunilow expression (i.e. a type derived from the DeclUniLowExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLUNIUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a decluniupp expression (i.e. a type derived from the DeclUniUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DECLUPPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a declupp expression (i.e. a type derived from the DeclUppExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DENSE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a dense matrix type (i.e. a type that is derived from the DenseMatrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DENSE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a dense vector type (i.e. a type that is derived from the DenseVector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DIAGONAL_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a diagonal matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_DIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a division expression (i.e. a type derived from the DivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_EIGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an eigenvalue expression (i.e. a type derived from the EigenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ELEMENTS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an element selection (i.e. a view on selected elements of a dense or sparse vector), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_EVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an evaluation expression (i.e. a type derived from the EvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_EXPANDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an expansion expression (i.e. a type derived from the ExpandExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_EXPRESSION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an expression (i.e. a type derived from the Expression base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_GENERAL_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a general matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_GENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a generator expression (i.e. a type derived from the GenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_HERMITIAN_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an Hermitian matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_IDENTITY_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an identity matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_INITIALIZER_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an initializer data type, i.e. an initializer vector or matrix, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_INVERTIBLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an invertible data type (i.e. a BLAS compatible type, long double, or any matrix with BLAS compatible element type), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_KRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a Kronecker product expression (i.e. a type derived from the KronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_LOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a lower triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATEVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix evaluation expression (i.e. a type derived from the MatEvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATEXPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix exponential expression (i.e. a type derived from the MatExpExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix generator expression (i.e. a type derived from the MatGenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATINVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix inversion expression (i.e. a type derived from the MatInvExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a unary matrix map expression (i.e. a type derived from the MatMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/matrix addition expression (i.e. a type derived from the MatMatAddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATKRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/matrix Kronecker product expression (i.e. a type derived from the MatMatKronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a binary matrix map expression (i.e. a type derived from the MatMatMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/matrix multiplication expression (i.e. a type derived from the MatMatMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATSOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a single LSE solver expression (i.e. a type derived from the MatMatSolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATMATSUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/matrix subtraction expression (i.e. a type derived from the MatMatSubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATNOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix no-alias expression (i.e. a type derived from the MatNoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATNOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix no-SIMD expression (i.e. a type derived from the MatNoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATREDUCEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix reduction expression (i.e. a type derived from the MatReduceExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATREPEATEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix repeater expression (i.e. a type derived from the MatRepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix type (i.e. a type that is derived from the Matrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATSCALARDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/scalar division expression (i.e. a type derived from the MatScalarDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATSCALARMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/scalar multiplication expression (i.e. a type derived from the MatScalarMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATSERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix serial evaluation expression (i.e. a type derived from the MatSerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATTRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix transposition expression (i.e. a type derived from the MatTransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a matrix/vector multiplication expression (i.e. a type derived from the MatVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MATVECSOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a single LSE solver expression (i.e. a type derived from the MatVecSolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MODIFICATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a modification expression (i.e. a type derived from the Modification base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_MULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a multiplication expression (i.e. a type derived from the MultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_NOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a no-alias expression (i.e. a type derived from the NoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_NOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a no-SIMD expression (i.e. a type derived from the NoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_OPERATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an operational expression (i.e. a type derived from the Operation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_OPPOSED_VIEW | ( | T | ) |
Constraint on the data type.
In case the given data type T is an opposed view, i.e. is a view that is opposed to the natural storage order of its underlying type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_PADDED_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does employ or simulate padding (i.e. no special treatment of remainder elements is necessary) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_PADDING_ENABLED | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide support for padding (i.e. properly treats padding elements), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_PROXY_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a proxy type (i.e. a type derived from the Proxy class template), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_REDUCEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a reduce expression (i.e. a type derived from the ReduceExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_REPEATEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a repeater expression (i.e. a type derived from the RepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_RESIZABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is resizable, i.e. has a 'resize' member function that can be used to change the size, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_RESTRICTED | ( | T | ) |
Constraint on the data type.
In case the given data type T does have a restricted data access, i.e. does not restrict any operation on its data, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ROW_MAJOR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a row-major dense or sparse matrix type (i.e. a matrix type whose storage order is set to false) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ROW_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a row type (i.e. a dense or sparse row), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ROW_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a row dense or sparse vector type (i.e. a vector type whose transposition flag is set to blaze::rowVector) a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ROWS_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a row selection type (i.e. a view on selected rows of a dense or sparse matrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SCALAR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a scalar type (i.e. neither a vector type, nor a matrix, reference or pointer type), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SCHUREXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a Schur product expression (i.e. a type derived from the SchurExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a serial evaluation expression (i.e. a type derived from the SerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SHRINKABLE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is shrinkable, i.e. has a 'shrinkToFit' member function that can be used to reduce the capacity, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SIMD_COMBINABLE_TYPES | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case the given data types T1 and T2 are SIMD combinable (i.e. do not have a common SIMD interface), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SIMD_ENABLED | ( | T | ) |
Constraint on the data type.
In case the given data type T is SIMD-enabled (i.e. does provide the according SIMD member functions), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SIMD_PACK | ( | T | ) |
Constraint on the data type.
In case the given data type T is a SIMD pack, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SMP_ASSIGNABLE | ( | T | ) |
Constraint on the data type.
In case the given data type T is SMP-assignable (can be assigned by multiple threads), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SOLVEEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a solver expression (i.e. a type derived from the SolveExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SPARSE_ELEMENT_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a sparse element type (i.e. a type derived from the SparseElement base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SPARSE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a sparse matrix type (i.e. whether T is derived from the SparseMatrix base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SPARSE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a sparse vector type (i.e. a type that is derived from the SparseVector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SQUARE_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a square matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_STATIC_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a static data type, i.e. a vector or matrix with dimensions fixed at compile time, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_STRICTLY_LOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a strictly lower triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_STRICTLY_TRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a strictly lower or upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_STRICTLY_UPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a strictly upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a subtraction expression (i.e. a type derived from the SubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SUBMATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a submatrix type (i.e. a dense or sparse submatrix), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SUBVECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a subvector type (i.e. a dense or sparse subvector), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SVDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a singular value expression (i.e. a type derived from the SVDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_SYMMETRIC_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a symmetric matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_TRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a transposition expression (i.e. a type derived from the TransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_TRANSFORMATION_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a transformation expression (i.e. a type derived from the Transformation base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_TRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a lower or upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_TVECMATMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/matrix multiplication expression (i.e. a type derived from the TVecMatMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UNARYMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a unary map expression (i.e. a type derived from the UnaryMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UNIFORM_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a uniform vector or matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UNILOWER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a lower unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UNITRIANGULAR_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a lower or upper unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UNIUPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a upper unitriangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_UPPER_MATRIX_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a upper triangular matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECEVALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector evaluation expression (i.e. a type derived from the VecEvalExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECEXPANDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector expansion expression (i.e. a type derived from the VecExpandExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECGENEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector generator expression (i.e. a type derived from the VecGenExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a unary vector map expression (i.e. a type derived from the VecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECNOALIASEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector no-alias expression (i.e. a type derived from the VecNoAliasExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECNOSIMDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector no-SIMD expression (i.e. a type derived from the VecNoSIMDExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECREPEATEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector repeater expression (i.e. a type derived from the VecRepeatExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECSCALARDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/scalar division expression (i.e. a type derived from the VecScalarDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECSCALARMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/scalar multiplication expression (i.e. a type derived from the VecScalarMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECSERIALEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector serial evaluation expression (i.e. a type derived from the VecSerialExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECTOR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector type (i.e. a type that is derived from the Vector base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECTRANSEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector transposition expression (i.e. a type derived from the VecTransExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECTVECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an outer map expression (i.e. a type derived from the VecTVecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECTVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is an outer product expression (i.e. a type derived from the VecTVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECADDEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/vector addition expression (i.e. a type derived from the VecVecAddExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECDIVEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/vector division expression (i.e. a type derived from the VecVecDivExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECKRONEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/vector Kronecker product expression (i.e. a type derived from the VecVecKronExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECMAPEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a binary vector map expression (i.e. a type derived from the VecVecMapExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECMULTEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/vector multiplication expression (i.e. a type derived from the VecVecMultExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VECVECSUBEXPR_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a vector/vector subtraction expression (i.e. a type derived from the VecVecSubExpr base class), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_VIEW_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a view type (i.e. a subvector, submatrix, row, column, ...), a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_BE_ZERO_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T is a zero vector or matrix type, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_HAVE_COMPOSITE_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide a public nested type alias named CompositeType a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_HAVE_CONST_DATA_ACCESS | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide low-level data access to constant data, i.e. does have a const 'data' member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_HAVE_MUTABLE_DATA_ACCESS | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide low-level data access to mutable data, i.e. does have a non-const 'data' member function, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_HAVE_RESULT_TYPE | ( | T | ) |
Constraint on the data type.
In case the given data type T does provide a public nested type alias named ResultType a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_NOT_REQUIRE_EVALUATION | ( | T | ) |
Constraint on the data type.
In case the given data type T requires an intermediate evaluation within composite expressions, a compilation error is created.
| #define BLAZE_CONSTRAINT_MUST_REQUIRE_EVALUATION | ( | T | ) |
Constraint on the data type.
In case the given data type T does not require an intermediate evaluation within composite expressions, a compilation error is created.
| #define BLAZE_CONSTRAINT_VECTORS_MUST_HAVE_DIFFERENT_TRANSPOSE_FLAG | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case either of the two given data types T1 or T2 is not a vector type and in case the transpose flags of both vector types does match, a compilation error is created.
| #define BLAZE_CONSTRAINT_VECTORS_MUST_HAVE_SAME_TRANSPOSE_FLAG | ( | T1, | |
| T2 ) |
Constraint on the data type.
In case either of the two given data types T1 or T2 is not a vector type and in case the transpose flags of both vector types don't match, a compilation error is created.